0086-571-88220653 TEXT ያድርጉ hzpt@hzpt.com
0 ንጥሎች

የአረብ ብረት ስፕሊን ቡሽንግስ

የአረብ ብረት ስፕሊን ቡሽንግስ

የአረብ ብረት ስፕሊን ቡሽንግስ

 

የአረብ ብረት ስፕሊን ቡሽንግስ

የአረብ ብረት ስፕሊን ቡሽንግስ

9-1.jpg

የተሰነጠቀ ቡሽንግ

ዝርዝር መግለጫ መግለጫ

Steel Splined Bushings new Splined Bushings

Steel Splined Bushings KF11,kf13,kf18,kf21,kf23,kf26,kf28,kf32,kf46

ፈጣን ዝርዝር:Steel Splined Bushings

Cast Iron mateሪዝ

መደበኛ እና መደበኛ ያልሆነ ይገኛል
በከፍተኛ ጥራት እና በተወዳዳሪ ዋጋ

በደንበኛው ፍላጎት መሠረት ማሸግ ፡፡

መግለጫ:

Steel Splined Bushings KF11,kf13,kf18,kf21,kf23,kf26,kf28,kf32,kf46

የሚከተሉትን ምርቶች እናቀርባለን  

1) የታፐር ጫካዎች 1008, 1108, 1210, 1215, 1310, 1610, 1615, 2012, 2017,2517, 2525, 3020,3030, 3525, 3535, 4030, 4040, 4535,4545, 5040,5050, 6050, 7060, 8065, 10085, እ.ኤ.አ. ከቁልፍ መንገድ ጋር 12010 የተለያዩ ቦረቦች በሜትሪክ እና ኢንች ውስጥ ይገኛሉ ፡፡

2) W እና WH taper Weld-on Hubs: W12,W16,W20,W25,W30,W35,W40,W45,WH12,WH16-1,WH20,WH25,WH30-2,WH35,WH40,WH45,WH50

3) K እና WA Weld-on Hubs: K25 - K120; WA12 - WA100

4) F እና S Weld-on Hubs: 6F25P - F30; S16-4 - S35

5) Ta

per Bolt-on Hubs: SM1200 - SM3020

6) የታፐር አስማሚዎች 1215 ቢ - 4545 ቢ

7) QD ቁጥቋጦዎች ጃ ፣ SH ፣ SDS ፣ SD ፣ SK ፣ SF ፣ E, F, J, M, N, P +, W +, S +

8) QD Weld-on Hubs፡- ጃ-ኤ ፣ SH-A ፣ SDS-A ፣ SK-A ፣ SF-A, EA, FA, JA, MA, NA

9) የተከፈለ አይነት ቁጥቋጦዎች (STB) ጂ ፣ ኤች; P1, P2, P3, B, Q1, Q2, Q3, R1, R2; S1, S2, Uo (1), Uo (2), U1, U2; W1 ፣ W2 ፣ ዮ

10) ለተበጣጠሰ ጫካ ቁጥቋጦ በተንጣለሉ ላይ ሀብስ- HG1 ፣ HH1 ፣ HCH1 ፣ HP1 ፣ HCP1 ፣ HP2 ፣ HB1 ፣ HB2 ፣ HQ1 ፣ HCQ1 ፣ HQ2 ፣ HR1 ፣ HR2 ፣ HS1 ፣ HS2 ፣ HU0 ፣ HU1 ፣ HU2 ፣ HW1

11) ኤክስቲ ቡሽ XTB15 ፣ XTB20 ፣ XTB25 ፣ XTB30 ፣ XTB35 ፣ XTB40 ፣ XTB45 ፣ XTB50 ፣ XTB60 ፣ XTB70 ፣ XTB80 ፣ XTB100 ፣ XTB120።

12) ኤክስኤች ማዕከሎች XTH15, XTH20, XTH25, XTH30, XTH35, XTH40, XTH45, XTH50, XTH60, XTH70, XTH80, XTH100, XTH120

13) XTH1

5F4, XTH15F5, XTH15F6, XTH15F8; XTH20F5, XTH20F6, XTH20F8, XTH20F10, XTH20F12; XTH25F6, XTH25F8, XTH25F10, XTH25F12

14) FHPK ቁጥቋጦዎች ኤች.ፒ.ፒ.ካ.

15) የኤች.ፒ.  HP18, FHP21, FHP22, FHP19, FHP23, FHP6, FHP7, FHP1, FHP8, FHP2, FHP11, FHP3, FHP9, FHP4, FHP10, FHP5, FHP20, FHP12, FHP13, FHP14

መተግበሪያዎች: 

እንደ ሸዋቭ ፣ ስፕሮኬት ፣ ፒን ቡሽ ባለትዳሮች ፣ ulሊ እና የመሳሰሉት ላሉት ለብዙ መተግበሪያዎች ምርቱን በደህና ወደ ግንድ ላይ ለመጫን ያገለግሉ ነበር ፡፡

Hub & Bush,Taper Bushes&Hubs,Auto Axle Wheel Hub Flange bush Bearing,Steel Hubs for Split Taper Bushes,Rear hub,motorcycle rear hub bush,Rear Wheel Hub,Motorcycle Parts Bush,bearing bush water pump bearing hub bearing,wheel hub bearing,longer linear bearing,sliding bearing,Steel Hubs for bush,hub oil seal/ bush,electric 

bicycle hub motor,Hub with taper lock bush,Steel Bushing and Hubs,Hub Carrier Bush。

ማሸግ ዝርዝሮች

Four Benefits of Splined Bushings

If you are interested in splines, you have come to the right place. Splined bushings are used to transmit power from a power unit to a propeller or working body. They are a common component of car or truck transmission systems. Angular contact, strength, and durability are some of the benefits of splines. Depending on your needs, you can choose a splined bushing based on any of the four factors.

Steel Splined Bushings new Splined Bushings 3

የማዕዘን ግንኙነት

Splined bushings have a groove that forms a perfect 40deg angular contact point with the shaft. These types of bushings feature a Gothic design that eliminates clearance and is ideal for applications requiring maximum precision. The ball-shaped splines have grooves that increase load capacity and rigidity while providing high sensitivity. Splined bushings also provide maximum speed and precision.

Although the cross-roller rotary nut technology is more advanced, the majority of applications use angular contact bearing supported ball splines. Although these splines are interchangeable, their design advantages make them preferable in certain applications. Crossed roller rotary nut technology is more compact, which can help reduce costs and enhance the efficiency of your applications. Splined bushings are compatible with most splines and are widely available in the market.

Crossed roller splines are compact and have relatively high load capacities. They are especially beneficial for applications where continuous rotation is not required. Conversely, angular contact splines have a larger rotational section and spline dimensions and a large footprint. However, they are still useful for many applications, including those in rotating equipment. But they aren’t for everyone.

Splined shafts are also used to replace hex-shaped or D-shape shafts. The increased surface area between the shaft and bushing reduces clearances between the two parts. A splined shaft can be parallel to a lead screw assembly and be a perfect anti-rotation shaft when creating linear motion. But if you’re looking for the best bearing for a specific application, ball splines are probably the best choice.

ፀረ-ማሽከርከር

Splined Bushings are manufactured with stainless steel, high-strength polymer, or double-d hole mounting systems. Bushings have an inner copper core and shaft that is swaged together to create a hex shape for 100% lubrication. Bushings can also be ordered with a low-friction PTFE coating to eliminate the need for grease in clean environments, like medical and semi-processing applications.

Splined Bushings are anti-rotary because they prevent the outer tube from rotating in relation to the motor vehicle frame. In addition, the anti-rotation mechanism 130 provides resilient connection between the non-rotating inner shaft 104 and the motor vehicle frame. The preferred anti-rotation mechanism includes a link 140 that is pivotally connected to the outer tube 120 and incorporates isolatorbushings to reduce transmission of vibration.

Torque splines are highly customizable. They can replace hex-shaped or D-shape shafts and can also replace dual-shaft configurations. By replacing two shafts with one, rotary ball splines provide excellent solutions for Z-theta axes in SCARA robots. Furthermore, these bushings are also suitable for automatic tool changers in CNC machine tools.

The recirculating balls of the spline nut ride in the grooves. Their contact area is much larger than the ball bushings, making them anti-rotation. The high-quality splined bushings are more durable than their ball bushing counterparts, so they are preferred for high-speed rotation. If you are looking for a high-performance anti-rotation bushing, this is the one for you!

ኃይል

Splined bushings connect shafts in power transmission systems. They are commonly used on helicopters, fixed-wing aircraft, and military ground vehicles. Since their introduction in the 1970s, splines have become a popular component in many applications. DuPont Vespel spline couplings, also known as shaft adapters, are machined components that fit to the outside of a metal shaft and the inside of the mating metal shaft.

The basic strength requirements for a spline shaft are determined by its section modulus. Most shaft manufacturers provide this information for each diameter, so the user can choose a suitable spline shaft. Torsion strength is essential for splined shafts because they experience torque loads. Because torsion and bending moments occur at different times, the strength of a spline must be sufficient to resist both.

A spline shaft can be either precision-ground or drawn to improve its strength. While precision-ground splines are more durable, non-ground ones are not. Because of the inherent difficulty of controlling a spline’s tooth pattern, these components have varying degrees of accuracy. In general, though, higher-grade steel is stronger than its non-ground counterpart. Whether it is ground or drawn, splined shafts are a reliable option for many applications.

Splined shafts have 16 teeth in the external and internal spline. They can be purchased in lengths from six to twenty-four inches. These splines are also available in carbon steel A 1C26 Series. They are highly customizable. Their splined shafts can have pullies added to the outside diameter, allowing for belt drive in one axis and passive guidance on the second. Torque splines can be used to move paper registration guides and fence guides. Similarly, they can be rotated to remove gates from the flow path.

ርዝመት

The SV and SVI series are designed in accordance with automotive involute spline standards. Their involute spline shafts and bushings are thermally refined. KHK USA makes no warranty as to the accuracy, suitability, or reliability of any data contained herein and assumes no liability for actual or consequential damage. H-Series and F-Series products are non-returnable and made-to-order.

The spline joint transmits power from a power unit to a propeller or working body. High-temperature effects may affect the strength and durability of steel. Structureless martensite, a form of structural steel, has improved the toughness and hardness of spline mates. It can also be used for applications where high-contact load and abrasive runout are significant.

The splines on a splined shaft provide the desired amount of torque transfer. They are versatile and can be used with pullies or for a second axis of linear travel. Several splines can be used on the same shaft – one as a drive bushing, the other a passive bushing. Torque splines can also be used to move paper registration guides or fence guides. They can even be rotated to remove gates in the flow path.

Some manufacturers of machine tools utilize a technique to lubricate the spline connection during assembly. This practice can cause the splines to become fretted, and can cause the connecting shaft to not rotate about its axial centerline. Without proper lubrication, this process can result in the shaft to float a significant distance between the splines, reducing their durability.

መጠን አስተካክል

A splined shaft has a symmetrical fit, which increases its maximum rotational speed and load capacity. Its diameter can vary from 11mm to 42mm, with larger shafts having six or eight keys. Depending on the manufacturer, spline shafts are either ground, or drawn. The level of accuracy is dependent on the grade and tolerance of the base material. For example, the accuracy of a ground spline shaft is more stringent than that of a non-ground shaft.

These splined shafts come in a variety of sizes, from 0.6 to 6 feet in stock. Their external spline teeth are 16 mm apart. Splined shafts are also available in a variety of materials, including stainless steel, carbon steel, and plastic. Whether you need a shaft for a small machine or a large machine, you’ll find the right splined bushing for your needs at G&G Manufacturing Company.

In addition to the splined shaft, splined bushes are available in metric sizes. A splined shaft is used in mechanical engineering, and splines are most often used in dual-shaft configurations. They are an excellent solution for coupling two shafts and transmitting higher torques. The two and three-point contact of ball splines in a single shaft is ideal for many situations.

Sizing of Splined Bushings should be done before you purchase them. You’ll need to determine the load capacity of the shaft and nut. The load capacity of ball splines is determined by the number and shape of grooves in the shaft and nut, and the spline nut’s axial length and thickness. You can also manipulate these factors to increase the load capacity of the nut and shaft.

እያንዳንዳቸው 10 እግሮች ወይም 3.05 ሜትር እያንዳንዳቸው በእቃ ማንጠፍ ወይም በእቃ ማንጠልጠያ የታሸጉ request እኛም እንደጠየቅነው ሰንሰለቱን ማሸግ እንችላለን ፡፡
የመላኪያ ጊዜ ክፍያ ከተቀበለ ከ 45 ቀናት በኋላ :
ወደብ የሻንጋይ / የኒንግቦ ወደብ
የመሪነት ጊዜ: ክፍያ ከተቀበለ ከ 45 ቀናት በኋላ

የአረብ ብረት ስፕሊን ቡሽንግስ

 

የእኛ አገልግሎት

የአረብ ብረት ስፕሊን ቡሽንግስየአረብ ብረት ስፕሊን ቡሽንግስ

 

 

ማረጋገጫዎቻችን

የአረብ ብረት ስፕሊን ቡሽንግስ

 

ተከተሉን

የአረብ ብረት ስፕሊን ቡሽንግስ

 

በየጥ

ጥ: የንግድ ድርጅት ወይም አምራች ነዎት?

መ: ቡድናችን በ 3 ፋብሪካዎች እና 2 በውጭ አገር የሽያጭ ኮርፖሬሽኖችን ያቀፈ ነው ፡፡

ጥ ናሙናዎች ይሰጣሉ? ነፃ ነው ወይስ ተጨማሪ ነው?

መ: አዎ, እኛም ነጻ ክፍያ ለማግኘት ናሙና ማቅረብ ይችል ነበር ነገር ግን የጭነት ዋጋ አይከፍሉም.

ጥ: - የመላኪያ ጊዜዎ ምን ያህል ጊዜ ነው? የክፍያ ውልዎ ምንድ ነው?

መልስ-በአጠቃላይ ከ40-45 ቀናት ነው ፡፡ ጊዜው እንደ ምርቱ እና እንደ ብጁነት ደረጃ ሊለያይ ይችላል ፡፡ ለመደበኛ ምርቶች ክፍያው 30% ቲ / ቲ በቅድሚያ ፣ ቀድሞ ሚዛን አለው

ሽርሽር

ጥ: ለምርትዎ ትክክለኛ MOQ ወይም ዋጋ ምንድነው?

መ: አንድ የኦሪጂናል ዕቃ አምራች ኩባንያ እንደመሆናችን መጠን ምርቶቻችንን ከተለያዩ ፍላጎቶች ጋር ማቅረብ እና ማመቻቸት እንችላለን ፣ ስለሆነም ፣ MOQ እና ዋጋ በመጠን ፣ በቁሳቁስ እና ተጨማሪ ዝርዝሮች ላይ በእጅጉ ሊለያይ ይችላል ፡፡ ለ

ለምሳሌ ፣ ውድ ምርቶች ወይም መደበኛ ምርቶች ብዙውን ጊዜ ዝቅተኛ MOQ ይኖራቸዋል። በጣም ትክክለኛውን ጥቅስ ለማግኘት እባክዎ ከሁሉም አስፈላጊ ዝርዝሮች ጋር ያነጋግሩን።

 

 

የምርት ምድብ